DETEKSI KONDISI AMBANG BATAS DALAM TEKNIK FABRIKASI LASER MENGGUNAKAN FOTOLUMINESENSI

Edy Yulianto

doi:10.24176/crankshaft.v4i2.6449

DETEKSI KONDISI AMBANG BATAS DALAM TEKNIK FABRIKASI LASER MENGGUNAKAN FOTOLUMINESENSI

Edy Yulianto - [ https://orcid.org/0000-0001-7800-7446 ]

Abstract

Mengetahui kondisi ambang batas dalam fabrikasi laser sangat penting untuk memastikan keberhasilan fabrikasi. Pada saat ini, kondisi ambang batas dalam fabrikasi laser ditentukan dengan mengkarakterisasi struktur yang dikembangkan hasil dari proses fabrikasi laser pada fabrikasi awal. Dalam penelitian ini, kami memperkenalkan teknik yang mudah dan cepat untuk menentukan kondisi ambang batas yang dapat dilakukan pada saat proses fabrikasi dengan laser. Sehingga teknik ini dapat digunakan untuk memastikan pembentukan struktur dengan cepat pada saat proses fabrikasi sedang berlangsung.

Teks Lengkap:

PDF

Referensi

S. Kawata, H.B. Sun, T. Tanaka, K. Takada, Finer features for functional microdevices, Nature 412 (2001) 697–698.

H. Misawa, S. Juodkazis (Eds.), 3D Laser Microfabrication: Principles and Applications, Willey, 2006.

M. Malinauskas, A. Zukauskas, S. Hasegawa, Y. Hayasaki, V. Mizeikis, R. Buividas, S. Juodkazis, Ultrafast laser processing of materials: from science to industry, Light-Sci. & Appl. 5 (2016) e16133, https://doi.org/10.1038/lsa.2016.133.

M. Deubel, G. von Freymann, M. Wegener, S. Pereira, K. Busch, C. Soukoulis, Direct laser writing of three-dimensional photonic-crystal templates for telecommunications. Nat. Mater. 3 (2004) 444–447.

V. Mizeikis, K.K. Seet, S. Juodkazis, H. Misawa, Three-dimensional woodpile photonic crystal templates for infrared spectral range, Opt. Lett. 29 (2004) 2061–2063.

I. Sakellari, X. Yin, M.L. Nesterov, K. Terzaki, A. Xomalis, M. Farsari, 3D chiral plasmonic metamaterials fabricated by direct laser writing: the twisted omega particle, Adv. Opt. Mater 5 (16) (2017) 1700200, https://doi.org/10.1002/adom.201700200.

I. Faniayeu, V. Mizeikis, Vertical split-ring resonator perfect absorber metamaterial for IR frequencies realized via femtosecond direct laser writing, Appl. Phys. Express 10 (6) (2017) 062001, https://doi.org/10.7567/APEX.10.062001.

T. Frenzel, M. Kadic, M. Wegener, Three-dimensional mechanical metamaterials with a twist, Science 358 (6366) (2017) 1072–1074, https://doi.org/10.1126/science.aao4640.

T. Gissibl, S. Thiele, A. Herkommer, H. Giessen, Two-photon direct laser writing of ultracompact multi-lens objectives, Nat. Photonics 10 (2016) 554–560.

W.C. Lee, Y.J. Heo, S. Takeuchi, Wall-less liquid pathways formed with three-dimensional microring arrays, Appl. Phys. Lett. 101 (2012) 14108.

Yulianto, E, Chatterjee S., and Mizeikis V. "Characterization of Latent 3D Laser Photoexposure Patterns in Photoresist Created by Direct Laser Writing." Materials Today: Proceedings 13 (2019): 149-153, https://doi.org/10.1016/j.matpr.2019.03.205

Yulianto, E, et al. "Imaging of latent three-dimensional exposure patterns created by direct laser writing in photoresists." Applied Surface Science 479 (2019): 822-827, https://doi.org/10.1016/j.apsusc.2019.02.033

Yulianto, E, Purlys,V and Mizeikis,V. "Characterization of latent three-dimensional exposure patterns in photoresists." Advanced Fabrication Technologies for Micro/Nano Optics and Photonics XII. Vol. 10930. International Society for Optics and Photonics, 2019, https://doi.org/10.1117/12.2510806

M. Malinauskas, A. Žukauskas, G. Bičkauskaitė, R. Gadonas, S. Juodkazis, Mechanisms of three-dimensional structuring of photo-polymers by tightly focussed femtosecond laser pulses, Opt. Express 18 (10) (2010) 10209–10221, https://doi.org/10.1364/OE.18.010209.

DOI: https://doi.org/10.24176/crankshaft.v4i2.6449