SISTEM MONITORING KUAT ARUS, TEGANGAN DAN DAYA SOLAR CELL PADA ALAT UKUR KUALITAS AIR TAMBAK UDANG VANAME

Imam Abdul Rozaq

Abstract


On the quality of shrimping device with the pond of solar power plant is one of the solutions to increase the need for electrical energy. This power plant uses solar cell as a source of major power generation. This tool designer is used to utilize solar energy as a source of energy on the quality of water, using charging control accu which controls the tension, flow of solar panel towards aki. The manufacture of this tool as a complement to the previous tool is a water quality monitoring tool. This study of current monitoring tools, stress and solar cell power in the quality measuring instrument, this tool is able to memonitoring value of flow, tension and power. Sensor current testing has an accuracy rate of 99.1% later voltage 99.31% and 99.07%. This study performed data with web cayenne, using MQTT protocols, in a stable value of values but on current values have critical value and value in 19.00 – 05.00 am.


Keywords


Solar Power, Solar Cell, Control charge accu, Sensors INA219

Teks Lengkap:

PDF

Referensi


Monda, H. T., Feriyonika, F., & Rudati, P. S. (2018). Sistem Pengukuran Daya pada Sensor Node Wireless Sensor Network. Prosiding Industrial Research Workshop and National Seminar, 9, 28–31. [2] Myori, D. E., Mukhaiyar, R., & Fitri, E. (2019). Sistem Tracking Cahaya Matahari pada Photovoltaic. INVOTEK: Jurnal Inovasi Vokasional Dan Teknologi, 19(1), 9–16. https://doi.org/10.24036/invotek.v19i1.548 [3] Salam, S., & Mubarok, H. (2019). Monitoring Output Daya Prototype Solar Tracker Dual Axis Menggunkan Web Server Berbasis Arduino. 2–7. [4] Adam, A., & Amri, H. (2019). Prototype Monitoring Arus Dan Tegangan Menggunakan Sms Gateway. Multitek Indonesia, 13(1), 16. https://doi.org/10.24269/mtkind.v13i1.1710 [5] Daryono Restu Wahono. (2015). Pengukuran Proses Pengisian Dan Pengosongan Baterai Untuk Mengetahui Keandalan Tegangan Dan Arus Panel Surya the Process Measurement of Battery Charge-Discharge To. Jurnal Instrumentasi, 39(1), 15–24. [6] I Gusti Ngurah Agung Mahardika, I Wayan Arta Wijaya, I. W. R. (2016). Rancang Bangun Baterai Charge Control Untuk Sistem Pengangkat Air Berbasis Arduino Uno Memanfaatkan Sumber Plts. Jurnal Ilmiah Spektrum, 3(1), 26–32. [7] Mauko, I. C., Setiohardjo, N. M., & Noach, F. P. (2017). Pengembangan website unit penelitian dan open source di Politeknik Negeri Kupang. Jurnal Ilmiah FLASH, 3, 100–108. http://jurnal.pnk.ac.id/index.php/flash/article/view/145/87 [8] Pangestu, A. D., Ardianto, F., & Alfaresi, B. (2019). Sistem Monitoring Beban Listrik Berbasis Arduino Nodemcu Esp8266. Jurnal Ampere, 4(1), 187. https://doi.org/10.31851/ampere.v4i1.2745 [9] Prasetyo, K. A., Yuniarti, N., & Prianto, E. (2018). PENGEMBANGAN ALAT CONTROL CHARGING PANEL SURYA MENGGUNAKAN ADUINO NANO UNTUK SEPEDA LISTRIK NIAGA. vol.2,No.1, 50–58. [10] Pratama, R., & Ali, M. (2020). Pengembangan Sistem Akuisisi Data Arus, Tegangan, Daya Dan Temperatur Pada Pembangkit Listrik Tenaga Surya. Jurnal Edukasi Elektro, 3(2), 55–62. https://doi.org/10.21831/jee.v3i2.29812 [11] Salam, S., & Mubarok, H. (2019). Monitoring Output Daya Prototype Solar Tracker Dual Axis Menggunkan Web Server Berbasis Arduino. 2–7. [12] Saputra, G. Y., Afrizal, A. D., Khusnu, F., Mahfud, R., Pribadi, F. A., & Pamungkas, F. J. (2017). Penerpan Protokol MQTT Pada Teknologi WAN ( Studi Kasus Sistem Parkir Universitas BRAWIJAYA ). Jurnal Informatika Mulawarman E-ISSN 2597-4963 Dan p-ISSN 1858-4853, 12(2), 2–8. [13] Triyuandika, F., Ningrum, I. K., Djatmiko, W., Teknik, F., & Jakarta, U. N. (2018). Prototipe sistem energi terbarukan rumah tangga 1,2,3). Jurnal Autocracy, 114–127. https://doi.org/10.21009/autocracy.05.2.7


Article Metrics

Abstract views : 71| PDF views : 63

Refbacks

  • Saat ini tidak ada refbacks.


INDEKSASI