Analysis of Total Effective Equipment Performance SD5 Machine on Krosok Production Line, Primary Manufacturing Department. (Case Study: PT NT)

Adhie Prayogo


PT NT is one of an International Tobacco Industries in Indonesia. The rapid development of the cigarette industry, as well as the increased demand, encourage many companies to evolve their production quality and capacity. One effort established by PT NT is controlling the effectiveness of production machines, including SD5 machine. In this study, an analysis of SD5 machine performance conducted using the Overall Equipment Effectiveness and Total Effective Equipment Performance. Based on the ten days of direct observation of machine performance, the study revealed that the OEE level was only a mere at 63.2%, under the world level, 85%. Further, the TEEP number was about 36.8%. Those low figures were mainly caused by the low level of machine utilization and availability. Thus, the fishbone diagram established to discover the main causal, reporting that four main aspects, human, methods, material and machine, played essential roles in the problem.

Teks Lengkap:



Coccia, M. (2017). The Fishbone diagram to identify, systematize and analyze the sources of general purpose technologies. Journal of Social and Administrative Sciences, 4.

Dal, B., Tugwell, P., & Greatbanks, R. (2000). Overall equipment effectiveness as a measure of operational improvement - A practical analysis. International Journal of Operations and Production Management.

De Ron, A. J., & Rooda, J. E. (2006). OEE and equipment effectiveness: An evaluation. International Journal of Production Research.

Hedman, R., Subramaniyan, M., & Almström, P. (2016). Analysis of Critical Factors for Automatic Measurement of OEE. Procedia CIRP.

Hirschmann. (2020a). Frequency of cigarette smoking Indonesia 2019.

Hirschmann. (2020b). Tobacco industry in Indonesia - statistics & facts.

Joseph, A., & Jayamohan, M. S. (2017). Evaluation of Overall Equipment Effectiveness and Total Effective Equipment Performance: A case study. International Journal of Advance Engineering and Research Development, 4(5).

Lanza, G., Stoll, J., Stricker, N., Peters, S., & Lorenz, C. (2013). Measuring global production effectiveness. Procedia CIRP.

Liliana, L. (2016). A new model of Ishikawa diagram for quality assessment. IOP Conference Series: Materials Science and Engineering.

Nakajima, S. (1986). Introduction to Total Productive Maintenance (TPM).

Oztas, S., Kocak, N. D., Sengul, A., & Salepci, B. (2015). Evaluation of Cigarette Smoking Attitudes and Behaviors Among Students of a State High School in İstanbul. Eurasian J Pulmonol, 17.

Sayuti, M., Juliananda, Syarifuddin, & Fatimah. (2019). Analysis of the Overall Equipment Effectiveness (OEE) to Minimize Six Big Losses of Pulp Machine: A Case Study in Pulp and Paper Industries. IOP Conference Series: Materials Science and Engineering.


Article Metrics

Abstract views : 355| PDF views : 182

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.