ANALISA DAN PERANCANGAN SISTEM PENGADAAN DAN PENGENDALIAN PERSEDIAAN  BAN DAN SUKU CADANG DENGAN METODE EOQ (STUDI KASUS: PT. SEMPURNA DELTA KIRANA)

Shintya Dharma Yanti; Andi Nugroho

doi:10.24176/simet.v12i1.4412

ANALISA DAN PERANCANGAN SISTEM PENGADAAN DAN PENGENDALIAN PERSEDIAAN BAN DAN SUKU CADANG DENGAN METODE EOQ (STUDI KASUS: PT. SEMPURNA DELTA KIRANA)

Shintya Dharma Yanti
Andi Nugroho

Abstract

Procurement and inventory control is something to be considered in the company's business cycle, starting from the ordering process to inventory collection. PT. Sempurna Delta Kirana is one of the freight forwarding companies that purchase tires and spare parts regularly. As for the problems that often occur is the goods that have been ordered is not delivered on time, errors in the delivery of the type of goods, reports of entry checks and the expenditure of goods that are inaccurate and less transparent. To overcome these problems, we propose the manufacture of procurement system and control of tyre supplies and spare parts at PT. Sempurna Delta Kirana. By analyzing and designing applications of information system procurement and supply of goods using EOQ method as a method of research, pieces method as a problem analysis and prototyping method as a system development method, the results of this research is expected to provide the efficiency and effectiveness of the procurement process and control of company goods inventory.

Keywords: EOQ, piesces, procurement, prototyping,reports,spareparts.

Keywords

EOQ; piesces; procurement; prototyping; reports; spareparts

Teks Lengkap:

PDF

Referensi

[1] H. Japina. 2017. “Pengendalian Manajemen atas Sistem Informasi,” J. Ilman, vol. 5, no. 1, pp. 25–32.

[2] A. O. Sari and E. Nuari. 2017. “Rancang Bangun Sistem Informasi Persediaan Barang Berbasis Web Dengan Metode Fast(Framework for the Applications),” None, vol. 13, no. 2, pp. 261–266.

[3] E. Fatma and D. S. Pulungan. 2018. “Analisis Pengendalian Persediaan Menggunakan Metode Probabilistik dengan Kebijakan Backorder dan Lost sales,” J. Tek. Ind., vol. 19, no. 1, p. 38.

[4] N. A. Mohd-Lair, C. K. Pang, W. Y. H. Liew, H. Semui, and L. Z. Yew. 2013. “An EOQ based multi-storage location of spare part inventories: A case study,” Appl. Mech. Mater., vol. 315, no. June, pp. 733–738.

[5] Z. B. H. Hassan. 2013. “Latar belakang kajian Latar belakang kajian,” pp. 1–9.

[6] R. Adrifa, R. Kurniawan, and A. Sofyan. 2018. “Perancangan Sistem Pengontrolan Stok Barang pada Blesscom Komputer Dengan Metode Economic Order Quantity ( EOQ),” J. Inform., vol. 10, no. 1, pp. 39–47.

[7] A. Bachtiar. 2017. “Inventory Control Indirect Material: Eoq Model, Efektivitas Produksi,” Ekombis Rev., vol. 5, no. 2, pp. 103–113.

[8] P. M. Palupi, L. Korawijayanti, R. Handoyono, and P. N. Semarang. 2018. “Penerapan Metode Economic Order Quantity ( EOQ ) Untuk Meningkatkan Efisiensi Biaya Persediaan Bahan Baku ( Studi Kasus pada PT Nusamulti Centralestari ),” J. Unimus, vol. 1, pp. 426–435.

[9] S. Wongmongkolrit and B. Rassameethes. 2011. “The Modification of EOQ Model under the Spare Parts Discrete Demand: A Case Study of Slow Moving Items,” Lect. Notes Eng. Comput. Sci., vol. 2194, no. 1, pp. 1179–1184.

[10] A. Poojary and D. R. Satish Kumar. 2014. “RFID Application to Improve Inventory Management,” Int. J. Manag. Bus. Stud. 29, vol. 4, no. 4, pp. 29–33.

[11] L. Kini, O. Novareza, and A. Eunike. 2015. “Manajemen Persediaan Suku Cadang Mesin High Pressure Compressor Dengan Klasifikasi Fsn-Abc-Ved ( Studi Kasus di PT . Exterran Indonesia , GOSP Cepu ),” J. Rekayasa dan Manaj. Sist. Ind., vol. 3, no. 2.

[12] D. Kreutz, F. M. V. Ramos, P. E. Verissimo, C. E. Rothenberg, S. Azodolmolky, and S. Uhlig. 2015. “Software-defined networking: A comprehensive survey,” Proc. IEEE, vol. 103, no. 1, pp. 14–76.

[13] M. Ali and E. Aktas. 2012. “Radio Frequency Identification ( RFID ) Technologies for Locating Warehouse Resources : A Conceptual Framework Radio Frequency Identification ( RFID ) Technologies for Locating Warehouse Resources : A Conceptual Framework,” Int. J., vol. 8, no. 1.

[14] Nory Shenta Dewi. 2018. “Penerapan Penelitian Tindakan Kelas Cooperative Learning Tipe Peer Teaching untuk Meningkatkan Keterlibatan Siswa Dalam Pembelajaran Biologi An Action Research of Assembling Cooperative Learning Type Peer Teaching to Increase Student Engagement in Biology,” J. Pembelajaran Biol., vol. 7, no. 2, pp. 10–16.

[15] M. Kasirom. (2010). Metodologi Penelitian Kuantitatif-Kualitatif. in Malang: UIN Maliki Press, 2010.

[16] M. Octaviana, I. Baihaqi, and G. W. Bramanti. 2018. “Penetapan Kebijakan Persediaan Spare Parts : Studi Kasus Pabrik Perakitan Sepeda Motor,” J. Tek. ITS, vol. 7, no. 1.

[17] 2013 Rosa & Salahuddin. (2013). UML, Use Case Diagram, Activity Diagram, Class Diagram, in Rekayasa Perangkat Lunak Terstruktur.

[18] J. Kelly, S. Male, and D. Graham. (2008). Value Management of Construction Projects.

[19] S. Sholiq, C. Yunita, H. M. Astuti, T. D. Susanto, A. Herdiyanti, and K. Ghozali. 2018. “Perancangan dan Pembuatan Aplikasi Website E-Commerce untuk Produk Kerajinan Tangan UMKM Nena Namo,” Smatika J., vol. 8, no. 02, pp. 80–95.

[20] D. Trisnawati. 2016. “ANALISA FNS ( Studi Kasus : PG Krebet Baru I , Malang ),” Jemis, vol. 4, no. 1, pp. 11–18.

[21] J. HartonoMusakini. 2014. “Analisis & Desain Sistem Informasi Sitem Informasi: Pendekatan terstruktur teori dan praktik aplikasi bisnis,” in Analisis & Desain Sistem Informasi Sitem Informasi: Pendekatan terstruktur teori dan praktik aplikasi bisnis.

[22] Puspitasari. 2016. “Pengadaan Suku Cadang Mobil Pada,” J. Pilar Nusa Mandiri, vol. 12, no. 2, pp. 227–240.

DOI: https://doi.org/10.24176/simet.v12i1.4412