RE-LAYOUT SHOPFLOOR DEPARTMENT AT RETAIL COMPANY TO OPTIMIZE THE INITIAL LAYOUT, MATERIAL HANDLING REDUCTION, AND TRANSPORTATION WASTE MINIMIZATION  USING BLOCPLAN ALGORITHM

Kresna Adji Setya Wardhana; Winda Nur Cahyo

doi:10.24176/jointech.v5i1.13992

RE-LAYOUT SHOPFLOOR DEPARTMENT AT RETAIL COMPANY TO OPTIMIZE THE INITIAL LAYOUT, MATERIAL HANDLING REDUCTION, AND TRANSPORTATION WASTE MINIMIZATION USING BLOCPLAN ALGORITHM

Kresna Adji Setya Wardhana, Winda Nur Cahyo

Sari

Starcorss shopfloor employee (receiving and warehousing department) at headquarter stated on very high level of mental workload while high season compared while low season. Based on this consideration, the business owner asked the author personally to develop a new layout for shopfloor department as mitigation for mental workload based on previous research recommendation. Most likely 3 month the author has direct observed and proposed am optimized shopfloor layout with BLOCPLAN Algorithm approach. The proposal also considers about how to reduce waste activities on the shopfloor regarding material handling.

Kata Kunci

Retail, Facility Layout Planning, Blocplan Algorithm

Teks Lengkap:

PDF

Referensi

Supriyadi, Setiawan, D., Chayadi, D. (2019). Factory Layout Redesign Using Computerized Relative Allocation of Facilities Techniques (CRAFT) Algorithm Method. INTECH Journal, 5 (2).

Nasution A., Anugerah B. (2020). Factory Relayout PT. Sustainable Vegetable Industry with BLOCPLAN Tool Analysis. JSTI, 22 (1)

Lestari K., Sunandi D. (2019). Application of Lean Manufacturing to identify waste in the knitting fabric production process on the production floor of PT. XYZ. Polban Journal.

Slameto (2016). The Application of Fishbone Diagram Analysis to Improve School Quality.

Dinamika Ilmi, 16 (1).

Beyers, F., Heinrichs, H. (2020). Global Partnership for a Textile Transformation? A Systemtic Litarature Review on Inter- and Transnational Collaborative Governance of The Textile and Clothing Industry. Journal of Cleaner Production.

Pinheiro, E., Francisco, A. C. D., Piekarski, C. M., Souza, J. T. D. (2018). How to Identify Opportunities for Improvement in The Use of Reverse Logistics in Clothing Industries? A Case Study in a Brazilian Cluster. Journal of Cleaner Production.

Bose, T. K. (2012). Application of Fishbone Analysis for Evaluating Supply Chain and Business Process A CASE STUDY ON THE ST JAMES HOSPITAL. International Journal of Managing Value and Supply Chains (IJMVSC), 3 (2).

Ishikawa, K. (1986). Guide to Quality Control. Asian Productivity Organization.

Parawardhani, H., Amar, K. (2020). Waste Identification in Production Process Using Lean Manufacturing: A Case Study. Journal of Industrial Engineering and Halal Industries (JIEHIS), 1 (1).

Baharudin, I., Purwanto, A. J., Fauzi, M. (2021). Waste Analysis Using "9 Waste" in the Production Process of PT. ABC. Scientific Journal of Applied Information Technology, 8 (1).

Judha, O. C., Pratiwi, S. G., Rahman, A. (2015). Analysis of Material Handling System Design by Considering Hazard Risk at PG Rejo Agung Baru. ITS ENGINEERING JOURNAL, 4 (1).

Muslim, D., Ilmaniati, A. (2018). Proposed Improvements to Facility Layout for Optimizing Distance and Material Handling Costs with a Systematic Layout Planning (SLP) Approach at PT Transplant Indonesia. Journal of Media Engineering & Industrial Systems, 2 (1)

Sharma, P., Singh, H., Singh M. (2018). Importance of Activity Relationship Chart while designing a layout for an industry. Journal of Emerging Technologies and Innovative Research (JETIR), 5 (11).

Kriswanto, Yusuf, A. A. (2021). The Implementation of Total Quality Management with Fishbone Method in PT. Kaliaren Jaya Plywood. Bina Bangsa International Journal of Business and Management (BBIJBM), 1 (2).

Purnomo, D. H., Lukman, M. (2020). Reducing Waste using Integration of Lean Six Sigma and TRIZ Method: A Case Study in Wood Manufacturing Industry. Industrial Engineering Journal, 21 (2).

Priambodo, B., Huboyo, H. S., Sumiyati, S. (2020). Optimization of Waste Transportation Systems in Semarang Selatan District, Semarang City. Inkalindo Environmental Journal (IEJ),1 (2).

Shahnazi, R. (2021). Do information and communications technology spillovers affect labor productivity.

Structural Change and Economic Dynamics.

Nurprihatin, F., Tannady, H. (2017). Productivity Measurement Using Cobb-Douglas Function Based on Effective Working Hours. Journal of Industrial Engineering and Management Systems, 10 (1).

Ninny, Eprida, B., (2017). Production Planning and Raw Materials Needs Products by MRP Method in CV. Fawas Jaya. Journal of Industrial and Manufacture Engineering, 1 (1).

Novitasari, R., Iftadi, I. (2020). Lean Manufacturing Analysis for Waste Minimization in Door Pu Process.

INTECH Journal of Industrial Engineering, 6 (1): 65-74.

Nurwulan, N. R., Taghsya, A. A., Astuti, E.D., Fitri, R. A., Nisa, N. S. R. K. (2021). Lead Time Reduction Using Lean Manufacturing. Journal of Industrial and Manufacture Engineering, 5(1).

Prasetyo, E.P. (2017). Productivity of Textile Industry and Textile Products in Center Java.

Journal of Economics and Policy, 10 (2).

Tampubolon, J., Simangunsong, L. D. A., Sibuea, M. D. A., Sembiring, A. C., Mardhatillah,

A. (2020). Prayer Paper Production Facility Layout Redesign Using Systematic Layout Planning Method and CRAFT. International Journal of Science.

Lina, L. R., Ullah, H. (2019). The Concept and Implementation of Kaizen in an Organization. Global Journal of Management and Business Research: Administration and Management, 19(1).

Abdulmouti, H., (2018), Benefits of Kaizen to Business Excellence: Evidence from a Case Study. Industrial Engineering and Management.

Tarigan, U., Tarigan, U. P. P, Rahman, I. H., Rizkya, I., (2018). Design of Facility Layout with Lean Service and Market Basket Analysis Method to Simplification of Service Process in the Supermarket. MATEC of Conferences 197.

Khairawati, S. (2020). Retail Company Strategy Facing Industrial Revolution 4.0.

International Journal of Social Science and Business, 4 (2).

Suhardi, B., Juwita, E., Astuti, R. D. (2019). Facility Layout Improvement in Sewing Department with Systematic Layout Planning and Ergonomics Approach. Cogent Engineering.

Liu, H., Liu, X., Lin, L., Islam, S. N. M., Xu, Y. (2020). Study of The Layout Planning of Plant Facility Based on The Timed Petri Net and Systematic Layout Planning. PLOS ONE.

Al-Zubaidi, S. Q. D., Fantoni, G., Failli, F. (2020). Analysis of Driver for Solving Facility Layout Problems: a Literature Review. Journal of Industrial Information Integration.

Suminar, L. A., Wahyudin, W., Nugraha, B. (2020). Factory Layout Design Analysis of PT. XYZ with Activity Relationship Chart Method. Journal of Science and Technology, 20 (2).

Suyanto, (2012). Productivity Growth of Indonesian Manufacturing Companies and Foreign Investment: Application of the Decomposition Method. Journal of Development Economics, 13 (1).

Triyono, Cundara, N., Irwan H. (2014). Proposed Improvements to the Layout of Office Facilities at PT. BPR Mitra Arta Mulia Bengkalis Riau. Profession, 2 (2).

Haryono, H. D., Hakim, P. I., Suanggana, D. (2021). Factory Layout Redesign with Systematic Layout Planning (SLP) Method at Plant Welding Shop PT. Steel Facility Studio. Journal of Technology, 8 (2).

Hanum, B. (2021). Planning of Heavy Equipment Fabrication Plant Layout Using CORELAP Software: A Case Study of Indonesia. International Journal of Engineering Research and Advanced Technology, 7 (6).

Yuliant, R., Saleh A., Bakar A. (2014). Proposed Layout Design for Garment Company Facilities CV. X Using Conventional Methods. National Institute of Technology OnlineJournal, 3 (2).

Heragu, Sundaresh., 1997 “Facilities Design”, Second Edition, PWS Publishing Company, Boston.

Wignjosoebroto, Sritomo. 1992. Layout and Movement of Materials, Second Edition. Guna Widya, Jakarta.

Pratiwi, I., Muslimah, E., Aqil, A. W. (2012). Facility Layout Design in the Tofu Industry Using BLOCPLAN. Scientific Journal of Industrial Engineering, 11 (2).

Pramesti, M., Subagyo, H. S. H., Aprilia, A. (2019). Redesign of Layout of Jackfruit Chips Production Facilities and Proposed Occupational Health and Safety at MSME Fruit Chips Duta, Malang Regency. Journal of Socio-Economic and Agricultural Policy 3 (2).

Amri., 2014 “Industrial Engineering Introductory Teaching Materials”, Published by Malikussaleh University, Faculty of Engineering Department of Industrial Engineering, Aceh.

Purnomo, H. (2004). Facility Planning and Design. Yogyakarta: Graha Ilmu.

Adiasa, I., Suarantalla, R., Rafi, M. S., Hermanto, K. (2020). Factory Facility Layout Redesign at CV. Apindo Brother Successfully Uses Systematic Layout Planning (SLP) Method. Performa: Industrial Engineering Scientific Media 2020, 19 (2): 151-158.

Jati, N. P., Rahayu, A. D. I, Salsabila, S. E., Azzam, A. (2020). Facility Layout Design with CORELAP Algorithm for Educational Tour. IOP Conference Series: Materials Science and Engineering.

Prayogo, A., Zusi, H. (2020). Increase Efficiency with Production Model Re-Layout Using Activity Relationship Chart.

DIJEMSS, 3 (1).

Wahyukaton, Afifah, G. (2019). Redesign of Office Layout Using Activity Relationship Chart (ARC) at the “X” Department Administration Office of a “Y” University. IOP Conference Series: Materials Science and Engineering.

Sharma, M., Mor, A. (2015). Method to Generate Activity Relationship Chart in

Facility Layout Problems. INTERNATIONAL JOURNAL OF SCIENTIFIC PROGRESS AND RESEARCH (IJSPR), 13 (3).

Binoy, B., George, B. K. (2018). Plant Layout Optimization in Steel Forging Industry by CORELAP Algorithm. Indian Journal of Science and Technology, 11 (38).

Hadiguna, R., & Setiawan, H. (2008). Tata Letak Pabrik. Yogyakarta: Andi.

Setiyawan, D. T. (2017). Proposed Improvement of Layout of Fried Soybean Production Facilities with BLOCPLAN and CORELAP Methods (Case Study on MMM UKM in Gading Kulon, Malang). Industria: Journal of Agroindustrial Technology and Management, 6(1): 51-60.

Pailin, D., B. (2013). Proposed Improvement of Production Floor Layout Using the CRAFT Algorithm to Minimize Material Handling Costs and Total Moment of Moving Distance (Case Study of PT. Grand Kartect Jakarta). Metric Journal. 14(2): 73-82.

Tompkins, J., White, J., & Tanchoco, J. (1996). Facilities Planning (Fourth Edition). USA: John Wiley & Sons Inc.

Jakfar, A., Setiawan, W. E., Masudin, I. (20140). Waste reduction using a lean manufacturing approach.

Industrial Engineering Scientific Journal

Anik, M., Wibowo, A. D. (2020). Reduce Material Hanlding Cost Through Improvement Layout Using Systematic Layout Planning (SLP). Journal of Bolts and Manufacturing, 2 (2).

Badan Pusat Statistik (2020). https://www.bps.go.id/subject/9/industri-besar-dan-sedang.html

Amasuomo, E., Baird, J. (2016). The Concept of Waste and Waste Management. Journal of Management and Sustainability, 6 (4).

Budiartami, N. K., Wijaya, I. W. K (2019). Production Process Control Analysis to Improve Product Quality at CV. Cok Konfeksi in Denpasar. Management and Equilibrium Business Journal, 5 (2).

Aditi, B., Hermansyur, M. H. (2018). The Influence of Product Attributes, Product Quality and Promotion, To Purchase Decisions for Honda Brand Cars in Medan City. Scientific Journal of Management and Business, 19 (1)